Microwave Programming - C3 2025 System
MICROWAVE LAYOUTS
AMANA & PANASONIC MICROWAVES
- 1 – 1 Sandwich
- 2 – 2 Sandwiches
- 3 –
- 4 – Calibration
- 5 – Kid’s Pancake
- 6 –
- 7 –
- 8 –
- 9 – Mash Potato/Corn
- 0 – Pancakes/ Mash Potato/Corn
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 |
| 6 secs. | 10 secs. | 33 secs. | 18 secs. | 30 secs. | 30 secs. |
ONCUE MICROWAVES
- 1 – 1 Sandwich
- 2 – 2 Sandwiches
- 3 –
- 4 – Calibration
- 5 – Kid’s Pancake
- 6 –
- 7 –
- 8 –
- 9 – Mash Potato/Corn
- 0 – Pancakes
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 |
| 5 secs. | 8 secs. | 33 secs. | 15 secs. | 25 secs. | 20 secs. |
PROGRAMMING
PROGRAMMING AMANA MICROWAVES
- Before programming the microwaves ensure there is a Cambro container with water inside the microwave. Failure to do so can result in microwave damage!
- Open microwave door
- Press & hold #1 timer button for approximately 5 seconds (the word PROGRAM will appear)
- Select the button you are programming
- Enter cooking time by using the number buttons
- Hit START button to lock the time
- Close the door
- Test: Ensure there is a cambro container of water inside. Press the timer button to ensure the programming worked.
PROGRAMMING PANASONIC MICROWAVES
- Before programming the microwaves ensure there is a Cambro container with water inside the microwave. Failure to do so can result in microwave damage!
- For the Panasonic microwave you must ensure the microwave is the UNLOCK mode
- Open microwave door
- Press START & PROGRAM button for 2 seconds to unlock the microwave (PL = locked, P= unlocked)
- Once the microwave is in the unlocked mode, ensure the microwave door is open & press the Program button. You will see the word PROGRAM flashing.
- Select power level button
- Select the button number you would like to program
- Enter cooking time by using the number buttons
- Press the Program button
- Lock the microwave (Press START & PROGRAM button for 2 seconds to unlock the microwave) (PL = locked, P = unlocked)
- Close the microwave door
- Test: Ensure there is a cambro container of water inside. Press the timer button to ensure the programming worked.
PROGRAMMING ONCUE MICROWAVES
- Before programming the microwaves ensure there is a Cambro container with water inside the microwave. Failure to do so can result in microwave damage!
- Press and hold button 1 for approximately 5 seconds
- Press the button number to be programmed
- Enter cooking time by using the number buttons
- Press the start button to set the new programming changes to the button
- NOTE: To discard changes press stop button or close microwave door
- Press stop button to exit programming mode
- Test: Ensure there is a cambro container of water inside. Press the timer button to ensure the programming worked.