Microwave Programming
MICROWAVE
| 1 | 1 Sandwich/Cookie |
| 2 | 2 Sandwiches |
| 3 | 3 Cookies |
| 4 | Calibration |
| 5 | Kid's Pancake |
| 6 | |
| 7 | 1 Side Macaroni |
| 8 | 2 Sides Macaroni |
| 9 | Feed 10/15 Macaroni |
| 0 | Pancakes |
Programming Amana and Panasonic Microwaves:
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 |
|---|---|---|---|---|---|---|---|---|---|
| 6 secs | 10 secs | 12 secs | 33 secs | 18 secs | 30 secs | 55 secs | 1 min 30 secs | 30 secs |
Programming Amana Microwaves
- Before programming the microwaves ensure there is a Cambro container with water inside the microwave. Failure to do so can result in microwave damage!
- Open microwave door
- Press & hold #1 timer button for approximately 5 seconds (the word PROGRAM will appear)
- Select the button you are programming
- Enter cooking time by using the number buttons
- Hit START button to lock the time
- Close the door
- Test: Ensure there is a Cambro container of water inside. Press the timer button to ensure the programming worked.
Programming Panasonic Microwaves
- Before programming the microwaves ensure there is a Cambro container with water inside the microwave. Failure to do so can result in microwave damage!
- For the Panasonic microwave you must ensure the microwave is the UNLOCK mode
- Open microwave door
- Press START & PROGRAM button for 2 seconds to unlock the microwave (PL = locked, P= unlocked)
- Once the microwave is in the unlocked mode, ensure the microwave door is open & press the Program button. You will see the word PROGRAM flashing.
- Select power level button
- Select the button number you would like to program
- Enter cooking time by using the number buttons
- Press the Program button
- Lock the microwave (Press START & PROGRAM button for 2 seconds to unlock the microwave) (PL = locked, P = unlocked)
- Close the microwave door
- Test: Ensure there is a Cambro container of water inside. Press the timer button to ensure the programming worked.
Programming OnCue Microwaves:
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 |
|---|---|---|---|---|---|---|---|---|---|
| 5 secs | 8 secs | 10 secs | 33 secs | 15 secs | 28 secs | 50 secs | 1 min 30 secs | 20 secs |
Programming OnCue Microwaves
- Before programming the microwaves ensure there is a Cambro container with water inside the microwave. Failure to do so can result in microwave damage!
- Press and hold button 1 for approximately 5 seconds
- Press the button number to be programmed
- Enter cooking time by using the number buttons
- Press the start button to set the new programming changes to the button NOTE: To discard changes press stop button or close microwave door
- Press stop button to exit programming mode
- Test: Ensure there is a Cambro container of water inside. Press the timer button to ensure the programming worked.