Tea and Lemonade Urn Cleaning

Cleaning the Tea and Lemonade Urns

The dispensing spout should be disassembled into 3 pieces
Soak the 3 pieces in sanitized water
Use a stiff cleaning brush to clean the inside of the spout parts
The dispensing spout must be disassembled, cleaned, and sanitized on a daily basis
Wash, rinse, and sanitize the interior and exterior of the urn
Reassemble the dispensing spout. Leave in the open position while air drying to allow all water to drain.

Every Sunday night, clean all urns with Filter Pouch Cleaner
Place one Filter Pouch Cleaner into the tea basket
Slide the basket into place on the brewing machine
Place the urn under the brew basket
Press the TEA or LEMONADE button and brew hot water into the urn
Allow the solution to remain in the urn for a minimum of 10 minutes
Use the cleaning brush to swirl the mixture inside the urn
Drain the mixture, and thoroughly rinse and sanitize the urn(s)
Leave the dispensing spout in the open position while air drying to allow all water to drain