Grill Temperature Programming

From Jack's Wiki
Revision as of 13:33, 19 September 2024 by Bfultz (talk | contribs) (Created page with "== PROGRAMMING ACCUTEMP GRILL TEMPERATURE == * vEnsure the grill is on and has heated up - Programming will not work in pre-heat mode * • Press and hold the up or down arrow. The lights will start flashing. * • Use the up or down arrow to adjust the temperature to 300°F * • Press and hold the preset button you want to program the new temperature to. The grill will cut itself off. * • Turn the grill back on * • Press and hold the pre-set button you programmed...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

PROGRAMMING ACCUTEMP GRILL TEMPERATURE

  • vEnsure the grill is on and has heated up - Programming will not work in pre-heat mode
  • • Press and hold the up or down arrow. The lights will start flashing.
  • • Use the up or down arrow to adjust the temperature to 300°F
  • • Press and hold the preset button you want to program the new temperature to. The grill will cut itself off.
  • • Turn the grill back on
  • • Press and hold the pre-set button you programmed. If the programming took, you will see your new temperature setting in the display.
  • • Allow the temperature to adjust before using the grill
  • PROGRAMMING VULCAN GRILL TEMPERATURE
  • • Adjust the knobs to 350°F
  • • Allow the grill to heat up for 15 minutes
  • • Use grill surface thermometer to temp the grill
  • • Mark the settings on the knob using a sharpie
Retrieved from "https://content.jacksvu.com/wiki2/index.php?title=Grill_Temperature_Programming&oldid=684"