MICROWAVE
| 1
|
1 Sandwich/Cookie
|
| 2
|
2 Sandwiches
|
| 3
|
3 Cookies
|
| 4
|
Calibration
|
| 5
|
Kid's Pancake
|
| 6
|
|
| 7
|
1 Side Macaroni
|
| 8
|
2 Sides Macaroni
|
| 9
|
Feed 10/15 Macaroni
|
| 0
|
Pancakes
|
Programming Amana and Panasonic Microwaves:
| 1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
0
|
| 6 secs
|
10 secs
|
12 secs
|
33 secs
|
18 secs
|
|
30 secs
|
55 secs
|
1 min 30 secs
|
30 secs
|
Programming Amana Microwaves
- Before programming the microwaves ensure there is a Cambro container with water inside the microwave. Failure to do so can result in microwave damage!
- Open microwave door
- Press & hold #1 timer button for approximately 5 seconds (the word PROGRAM will appear)
- Select the button you are programming
- Enter cooking time by using the number buttons
- Hit START button to lock the time
- Close the door
- Test: Ensure there is a Cambro container of water inside. Press the timer button to ensure the programming worked.
Programming Panasonic Microwaves
- Before programming the microwaves ensure there is a Cambro container with water inside the microwave. Failure to do so can result in microwave damage!
- For the Panasonic microwave you must ensure the microwave is the UNLOCK mode
- Open microwave door
- Press START & PROGRAM button for 2 seconds to unlock the microwave (PL = locked, P= unlocked)
- Once the microwave is in the unlocked mode, ensure the microwave door is open & press the Program button. You will see the word PROGRAM flashing.
- Select power level button
- Select the button number you would like to program
- Enter cooking time by using the number buttons
- Press the Program button
- Lock the microwave (Press START & PROGRAM button for 2 seconds to unlock the microwave) (PL = locked, P = unlocked)
- Close the microwave door
- Test: Ensure there is a Cambro container of water inside. Press the timer button to ensure the programming worked.
Programming OnCue Microwaves:
| 1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
0
|
| 5 secs
|
8 secs
|
10 secs
|
33 secs
|
15 secs
|
|
28 secs
|
50 secs
|
1 min 30 secs
|
20 secs
|
Programming OnCue Microwaves
- Before programming the microwaves ensure there is a Cambro container with water inside the microwave. Failure to do so can result in microwave damage!
- Press and hold button 1 for approximately 5 seconds
- Press the button number to be programmed
- Enter cooking time by using the number buttons
- Press the start button to set the new programming changes to the button NOTE: To discard changes press stop button or close microwave door
- Press stop button to exit programming mode
- Test: Ensure there is a Cambro container of water inside. Press the timer button to ensure the programming worked.